SI Digital PC+
The Sonic Irrigator PC+ offers Sonic Irrigation with CPE (Cannulated Pulsed Flush Enhancement) but with the addition of monitoring features to record both key performance data for instrument traceability. The system monitors the critical cleaning process parameters making adjustments where necessary ensuring the ‘validated’ or ‘clinically proven’ process is maintained.
Critical process parameters such as time, temperature and ultrasonic power are monitored in accordance with current guidance and international standards and can be recorded permanently through a discreetly placed ‘data-port’ which intelligently detects whether you wish to keep the information on a database system, or simply connect a printer for ‘hard-copy’ print out for ‘traceability’ and legislative issues. |
| Features |
High Grade corrosion resistant stainless steel with brushed finish (316) |
Wash time and temperature display |
Temperature and time user adjustable |
SIX load carrier flush outputs, can be expanded to 12 |
CPE pump technology |
APG XP sonic generator 8 horn transducers |
Ultrasonic over-current protection |
Flat panel heater to maintain selected temperature between times of inactivity |
Drain: Manual Lever operated ball valve with pump assistance |
Lid interlock system to prevent Ultra-sonics running with the lid open |
Stainless steel lid with gas spring assistance |
Fused L & N, Fused Ultrasonic Generator and control PCB |
Low fluid level protection to prevent heater and Ultra-sonics from being activated with low or no water |
Control Fascia is wipe clean polycarbonate |
2 line LCD display |
Printer output for process monitoring (RS232) 9 pin D (8 bit no parity 2400 baud)
Machine ID
Cycle number,
Date & time
Wash time
Wash temperature
Ultra-sonics status |
| APG XP current monitoring |
Quality
Manufactured in the UK under Medisafe’s IS09001 Quality
Use
For Internal and external cleaning of Fine Surgical Instrumentation, other lumen instruments.
Environmental
For indoor use at altitudes up to 2000m.
Operating temperature -5°C to 40°C.
Humidity -80% RH max for temperatures up to 31°C,
decreasing linearly to 50% RH at 40°C.
Designed for Pollution Degree 2, i.e. not totally sealed.
Capacity
25 L Approx (6.5 US Galls Approx)
12 Cannulated Instruments (Max)
2 Kilos of Instruments
Electricity Supply
110 — 120 VAC 50 or 60Hz
220 — 240 VAC 50 or 60Hz
0.5 Watts (standby)
600 Watts (in use)
1200 Watts (max)
Water Supply
Hardness: Not more than 115 ppm Hot and Cold
Manual fill to wash temperature.
Drain
Main Drain: 18mm to drain (Hose supplied)
Max. Flow to Drain: 20 litres/min
Max. Temp. of Effluent: 60° C
Weight
30Kg (661bs) Dry
Dimensions
715W (+Drain 40mm) x 445D x 335H
|
