Endoscope cleaner. Space saving wall-mountable unit flushes, soaks and washes residues clean away before air purging the endoscope.

Endo-Purge sends advanced residue digesting enzymatic cleaning solution along and inside the endoscope channels leaving working/biopsy channels (even fine ERCP lumens) thoroughly clean.

Wall mounted endoscope cleaning in 8 minutes.
"Cleaning is the removal of all foreign material (e.g. soil, organic material) from objects. It is normally accomplished with water; mechanical action and detergents".

"Cleaning must precede disinfection and sterilisation procedures." APIC journal.

Clinically tested, Endo-Purge's validated process repeatedly flushes and soaks automatically, allowing enough time for enzymes to digest and clean ALL the remaining bio-residues and then flushing them away — this process is followed by a clean water rinse and air purging.

Specification

Electrical
100v-120v (50-60Hz)
220v-250v (50-60Hz)

Construction
High grade corrosion resistant stainless steel casing with brushed finish.

Programme-Cycle
Preset sequential automatic 8 minute cycle.

Quality
Manufactured in the UK under Medisafe's IS09001 Quality Programme.

Model
Endo-Purge — Auto Endoscope Cleaning System.

Use
For internal and external cleaning of Fine Lumen and Endotherapy instruments.

Dimensional Data
320W x 450D x 135H mm

Weight
7.5 Kilograms

Environmental
For indoor use at altitudes up to 2000m. Operating temperature -5°C to 40°C. Humidity -80% RH max for temperatures up to 31°C, decreasing linearly to 50% RH at 40°C. Designed for Pollution Degree 2, i.e. not totally sealed.